The Magnum Remote is designed to be simple to use while offering full menu features for set-up. Easy-to-read: The large LCD screen and at-a-glance LEDs display the inverter/charger status in a straightforward way. Soft keys give simple access to menus and a rotary encoder knob makes it easy to quickly scroll through menus and select settings. Non-volatile memory: Critical settings are saved even if the power is disconnected. No cross platform confusion: The ME-RC remote is the same remote used on all Magnum inverter/charger models in the ME MS MS-AE RD MM and the MMS Series lines. Multiple functional settings: The Remote offers multiple functions in one place including: inverter on/off charger on/off shore power breaker settings AGS control meter button setup and technical menus. Adjustable settings include shore power input from 5 to 60 amps; AGS settings for voltage temperature quiet time clock and status; inverter and charger settings for search watts battery bank size battery type charge rate VAC dropout contrast and power saver; and tech settings for battery temperature transformer and internal FETs software revisions and factory reset. A standard 50 4-wire twisted pair cable allows for plenty of room to display the Remote with ease. Features and Settings Two-line LCD display screen Yes Adjustable search mode 5 to 50 watts in 5 watt increments Low battery cutout settings 9 to 12.2 VDC (12 volt) 18 to 24.4 VDC (24 volt) and 36 to 48.8 VDC (48 volt) Selectable battery bank sizes 200 to 2500 amp-hours in 10 amp-hour increments Selectable battery charge profile Flooded AGM1 AGM2 and GEL type chemistries. Also includes custom voltage adjusment Adjustable charge rate 0 to 100% in 10% increments Adjustable VAC dropout 60 to 105 VAC Adjustable LCD contrast Yes Factory reset Resets to factory defaults (tech menu)